芯片解密是耐斯迪在 研究中成功破解的典型芯片型號，針對該芯片，我們解密周 期短、價格低、可靠性強。這里，我們將針對C8051F711 IC解密的主要技術特征做簡單介紹，這里我們僅提供對C8051F711 芯片的主要 功能特征介紹，供客戶及各類單片機解密工程師與電子工程師參考借鑒，有 IC解密 需求者請直接與我們聯系咨詢。
下面是關于C8051F711 芯片的主要性能特征介紹，我們提供給廣大客戶及其他各類技術工程師參考借鑒。
C8051F711單片機主要功能特征分析：
　High-Speed 8051 μC Core
　　- Pipelined instruction architecture; executes 70% of instructions in 1 or 2
　　system clocks
　　- Up to 25 MIPS throughput with 25 MHz system clock
　　Memory
　　- 8 kB Flash; in-application programmable in 512-byte sectors
　　- 32 bytes Data EEPROM with 100,000 cycle read/write endurance
　　(‘F708 and ‘F709)
　　- 512 bytes data RAM
　　- External parallel data memory interface
　　Analog Peripherals
　　10-Bit Analog to Digital Converter (‘F708 and ‘F710)
　　- Up to 500 ksps
　　- 16 external inputs
　　- On-chip voltage reference (may use VDD or external voltage)
　　- Built-in temperature sensor
　　- External conversion start input option
　　Comparator
　　- Programmable hysteresis and response time
　　- Configurable as interrupt or reset source
　　Capacitive Touch Sense
　　- 16-bit capacitance-to-Digital Converter
　　- Superior Noise Immunity and fast 40us aquisition time
　　- Up to 32 external inputs
　　- Auto-scan and compare
　　- Auto-accumulate 4x, 8x, and 16x samples
　　Digital Peripherals
　　Up to 54 Port I/O with high sink current
　　- Flexible configuration using digital crossbar
　　- Many can be configured for analog or digital function
　　- Every pin can be optimized for its best use
　　Serial Communications
　　- HW enhanced UART
　　- SMBusTM (I2C compatible)
　　- Enhanced SPITM
　　User Programmable Timing Functions
　　- Four general purpose 16-bit counter/timers
　　- 16-bit programmable counter array (PCA) with three capture/compare
　　modules and enhanced PWM capability
　　- Real-time clock mode using enhanced timer and crystal
　　Clock Sources
　　- Calibrated Internal programmable oscillator
　　?芯片解密單片機破解 Calibrated to 2% accuracy over temp and Vdd
　　? 24.5 MHz to allow max speed CPU operation
　　? Supports crystal-less UART operation
　　- External oscillator: Crystal, RC, C, or Clock
　　- Can switch between clock sources on-the-fly
　　Supply Voltage: 1.8 to 3.3 V
　　- Built-in voltage supply monitor
　　Temperature Range: –40 to +85 °C